manufactured in the USA with ETL/UL listed and UL 508A certified components. Manufactured in the USA. Custom-sized to your equipment — delivered and installed nationwide.
Pre-engineered for large equipment and production parts, built with ETL/UL listed components and spec’d to your dimensions.
Integrated heat for accelerated cure cycles. Pairs with PFS control panel.
Side-to-side airflow. Cost-effective for large open-floor operations.
Ceiling intake, side exhaust. Ideal for wide-format equipment.
Full ceiling-to-floor airflow. Maximum overspray capture.
Rear-angled exhaust. Versatile for mixed production environments.
PFS paint and spray booths are ETL listed by Intertek for flammable and combustible applications in the USA and Canada (cETLus). Control panels are UL 508A, including hazardous-location panels. Booths are built to NFPA 33, the IBC, and the NEC. Fire protection is dry chemical (Amerex, Pyro-Chem, or Stat-X) or sprinklers. PFS builds its own air make-up units.
Tap any photo to open it full size.
Pre-engineered for large equipment. Custom-sized to the machine and installed nationwide.
Full-downdraft booths for large parts and assemblies, and heated booths when the coating needs a faster cure.
High-volume open-front finishing for large parts and production lines.
PFS booths ship with ETL-listed electrical packages, and we provide the drawings and data your permit packet needs. Requirements vary by jurisdiction, so confirm with your authority having jurisdiction. See our NFPA 33 guide.
Overhead cranes, carts, rail systems and conveyors all change the booth layout. Tell us how parts enter and leave the booth and we will size doors, openings and the floor around it.
Small and medium parts on carts or hooks often run in open-face booths or batch booths. Large weldments, frames and machinery need enclosed cross-flow, semi-downdraft or side downdraft booths sized around the part with room for painters and lifts.
When volume is steady, a line of wash, dry-off, paint and cure stages improves quality and labor. PFS supplies wash booths, paint booths, cure ovens and controls as one system.
Industrial coatings range from high-solids enamels to two-component epoxies and urethanes. We choose exhaust filters and airflow for your coating and transfer method, and can provide powder booths for liquid lines.
heated booths and cure ovens speed up cure for epoxies and urethanes and keep coatings in spec in cold weather.
Every PFS booth is built with ETL/UL listed components and engineered to NFPA 33, the NEC (Article 516) and OSHA 1910.107. Your local fire marshal and air district have the final say, so we supply drawings, airflow data and cut sheets for permitting. See our NFPA 33 compliance guide for the details.
To quote quickly, send us: the largest part (L × W × H and weight) and how it moves; the door opening you need; your building footprint, ceiling height and power; the coatings you spray; and how many units per day or week you finish. Photos of the space help.
Quote in 24 hours. manufactured in the USA with ETL/UL listed components. Installed nationwide by PFS-certified technicians.
Cross-flow is the most cost-effective for general industrial work. Choose downdraft or semi-downdraft when the finish is critical or parts are large and tall.
Yes. We build blasting systems, powder coating systems and ovens, and can lay them out as one finishing line.
Open-front design for large parts, high-volume production, and facilities where full enclosure is not required.
Horizontal airflow — the most cost-effective enclosed booth for automotive and industrial finishing.
Ceiling intake and side-wall exhaust. No concrete pit, no raised floor — it sits on your existing slab.
Tempered make-up air systems to replace exhausted air and maintain positive booth pressure.
