Industrial Paint Booths

Spray paint booths ETL listed (Intertek) for the USA and Canada, for automotive, aerospace, industrial, and fleet applications — available in open face, enclosed, aircraft, outdoor, and custom configurations.

Industrial Paint Booth Questions

What is an industrial paint booth?

An industrial paint booth, or industrial spray booth, is a ventilated work area that pulls overspray away from the painter and the part and through exhaust filters. Platinum Finishing Systems (PFS) builds industrial paint booths in enclosed, open face, aerospace, truck and large vehicle, outdoor, container, inspection, parts and custom configurations.

Are PFS paint booths ETL listed?

Yes. PFS spray paint booths are ETL listed (Intertek) for the USA and Canada and built to NFPA 33, with the UL 508A certified PFS Core Control Panel. An ETL listed paint booth helps with permits and inspections; the NFPA 33 compliance guide explains the main requirements.

Is PFS a paint spray booth manufacturer in the USA?

Yes. Platinum Finishing Systems (PFS) designs and manufactures its paint booths in the USA, at our shop in Santa Rosa, California, and installs and services them. Paint booths, filters and service all come from the same team.

Cross-flow, semi-downdraft, side downdraft or full downdraft: what is the difference?

In a cross-flow booth, air enters through filtered doors at the front and is pulled horizontally across the part to an exhaust plenum at the rear. In a full downdraft booth, filtered air enters through the ceiling and is pulled straight down to grated trenches in the floor. Semi-downdraft and side downdraft booths bring air in through the ceiling and exhaust it at the back wall or along the side walls, without a floor pit. See cross-flow vs. downdraft.

Enclosed or open face paint booth?

Enclosed paint booths surround the work for the best overspray containment and finish quality. Open face paint booths have an open front for large parts and high-volume production where full enclosure is not required, at a lower cost and with faster throughput.

Does PFS build automotive spray booths?

Yes. For collision repair and auto body shops and automotive manufacturing, PFS offers the Zenith full downdraft, Helios side downdraft and Orion booths with spray-and-bake heating, plus prep stations and paint mix rooms.

What about truck, bus and fleet spray booths?

Truck and large vehicle paint booths are oversized booths for semi trucks, buses, fleet vehicles and large equipment, in cross-flow, side downdraft, semi-downdraft and full downdraft airflow. They are built to custom width, height and length, and a drive-through configuration is available.

Does PFS make aerospace and aircraft paint booths?

Yes. Aerospace paint booths are oversized, high-clearance booths for aircraft, helicopters and UAVs, built to meet MIL-SPEC and aerospace finishing standards.

Can PFS build a custom spray booth?

Yes. Custom paint booths are engineered to your facility dimensions, process requirements and local code. There is no standard size to work around.

Can a paint booth go outdoors or in a shipping container?

Outdoor paint booths are permanent engineered steel structures on a concrete pad with a full spray booth inside, heated or non-heated. Shipping container paint booths convert an ISO container into a mobile spray booth that can be deployed with minimal site prep.

Can an industrial paint booth spray and bake?

Yes. PFS booths come in heated and non-heated versions. A heated air make-up unit gives the booth spray, flash and cure modes through the PFS Core Control Panel.

Does PFS supply industrial spray booths outside California, such as Georgia?

Yes. PFS ships its industrial spray booths to all 50 states, including Georgia, and provides project support from order through installation. Our engineers review your facility, process and throughput and recommend a configuration at no charge; the Industrial Paint Booth Buyer’s Guide lists what to have ready.

Where do I get replacement filters for my booth?

PFS Filters stocks intake, exhaust, ceiling and prefilter media for paint booth maintenance. See replacement paint booth filters.

Who manufactures industrial paint booths in the USA?

Several U.S. companies design and build industrial paint booths. Platinum Finishing Systems (PFS) is a spray paint booth manufacturer in Santa Rosa, California that builds ETL listed (Intertek) booths for automotive, aerospace, industrial, truck, and custom applications, and installs, services, and supplies filters for them.

What should I look for when comparing spray booths in the USA?

Look for a booth built in the United States, listed to a recognized standard such as ETL, designed to NFPA 33, and sized for your parts, airflow, and heat. Platinum Finishing Systems (PFS) manufactures industrial spray booths in Santa Rosa, California, and as a finishing system integrator also builds the ovens, mix rooms, and complete liquid paint lines and powder coating lines that often go with a booth.

What is a paint spray booth?

A paint spray booth is a ventilated enclosure that captures overspray while a part is painted. Spray booths and paint spray booths are the same kind of equipment. Platinum Finishing Systems (PFS) builds them as industrial paint booths in enclosed, open face, aircraft, outdoor, truck and custom configurations, ETL listed (Intertek) for the USA and Canada.

What types of spray booths does PFS build?

PFS builds cross-flow, semi-downdraft, side downdraft and full downdraft spray booths, plus open face and enclosed booths, so a shop can match airflow to the part and the finish. The Industrial Paint Booth Buyer’s Guide covers how to choose.

What is an industrial spray booth used for?

An industrial spray booth is used to paint or coat parts in a controlled, ventilated space so overspray is pulled away from the painter and the finish. PFS industrial paint booths are made in Santa Rosa, California, and are used in automotive, aerospace, industrial and fleet work, with booths shipped to all 50 states.

How much does an industrial paint booth cost?

It depends mainly on booth size, airflow type and heat: a cross-flow booth is usually the most cost-effective enclosed option, while semi-downdraft, side downdraft or full downdraft airflow and a heated air make-up unit add cost. Controls, filtration, installation and local fire and air permits also affect the total, so PFS quotes each booth from your part size, airflow, heat and site details.

Not Sure Which Booth Is Right for You?

Our engineers will review your facility, process, and throughput — and recommend the right configuration at no charge.
Replacement Filters

Replacement Filters for This Booth

Need replacement filters for this booth? PFS Filters stocks intake, exhaust, ceiling, and prefilter media for paint booth maintenance.

Types of spray booths: PFS builds cross-flow, semi-downdraft, side downdraft and full downdraft paint booths, plus open face, enclosed, aircraft, outdoor and truck booths. See the Buyer’s Guide for how to choose.

Platinum Finishing Systems (PFS) is a U.S. spray paint booth manufacturer in Santa Rosa, California. We design, manufacture, and install industrial paint booths, 100% USA fabricated at our Santa Rosa shop, and ship them to all 50 states.