PFS Orion semi-downdraft truck paint booth under an outdoor canopy at Platinum Finishing Systems

TRUCK & FLEET

Semi-Downdraft Truck Booths for Semis, Buses and Fleets

PFS TRUCK BOOTHS

Built by Platinum Finishing Systems (PFS). Also called a modified downdraft truck booth: air enters through the front half of the ceiling, travels down and back through the booth, and exhausts at the rear floor line. Cleaner finishes than crossflow, with no pit. ETL listed (Intertek) for the USA and Canada, NFPA 33 compliant, made in the USA. Ships nationally.

Trusted By Industry Leaders
  • Boeing
  • Ashley Furniture
  • SpaceX
  • Tesla
  • CAT
  • Carstar
  • Metro
  • AV
  • Seneca
  • LeROI
  • DG
  • G&C
  • Mission Bell
  • United Rentals
  • AEL
  • Google
PFS Orion semi-downdraft truck booth exterior, side and front view with four windowed doors and a roof exhaust stack, under a blue sky
FEATURED PAINT BOOTH

PFS Orion Semi-Downdraft Truck Booth

PFS TRUCK BOOTHS

Ceiling intake over the front half of the booth, with exhaust at the rear floor line. The airflow path is diagonal — down and toward the rear — so you get a cleaner finish than crossflow without digging a pit. The booth sits on your existing slab. Optional natural gas or electric heat, an air make-up unit with humidity control, and spray and bake (cure) can be added.

  • No pit required
  • Better finish than crossflow
  • Good all-round fleet booth
  • Front ceiling intake plenum and rear floor exhaust
  • CID2 lighting and UL 508A control panel
  • ETL listed (Intertek) for the USA and Canada, built to NFPA 33, made in the USA
Booth Details

Configurations, Airflow, Specs, Typical Sizes & Compliance

AVAILABLE CONFIGURATIONS

A pit-free step up from crossflow.

Semi-downdraft truck booth airflow: filtered air enters through the front half of the ceiling, moves down and toward the rear, and exhausts at the rear floor line to the exhaust stack

Semi-downdraft

Fresh air enters through a front ceiling intake plenum and moves down and back toward exhaust at the rear floor line, carrying overspray away from the painter without a pit. Also called a modified downdraft.
Heated semi-downdraft truck booth airflow: a burner in the air make-up unit heats the supply air, which enters through the front ceiling intake, moves down and toward the rear and exhausts at the rear floor line

Heated semi-downdraft

A PFS air make-up unit heats and filters the supply air before it enters the front ceiling intake. Air still moves down and back to the rear floor-line exhaust, with no pit. Gas-fired or electric heat, with spray, flash and cure modes on the PFS Core Control Panel. Humidity control is available on the AMU.
STANDARD SPECIFICATION

Certified. Engineered. Delivered Complete.

01

Industrial Service Lighting

Inside-access, Class I Division 2 (CID2) four-tube fixtures are standard. Fluorescent or LED tube compatible — optional LED upgrade available. manufactured in the USA with ETL/UL listed components. Uniform, shadow-free illumination.
02

UL-Listed Tube Axial Fans

Non-sparking tube-axial exhaust fans with belt guards and duct connector rings. UL/CUL and CSA recognized — three-phase, TEFC, tri-voltage — rated for continuous industrial duty.
03

Galvanized or Powder Coated Steel

18-gauge G90 galvanized sheet steel is standard. Powder coat finish available for environments requiring additional corrosion resistance. Structural steel columns and beams support horizontal panel assembly.
04

Exhaust & Intake Filtration

Fiberglass exhaust filters are standard. Intake uses tacky-type media — blanket intake upgrades available for heated booth configurations. Filtration matched to your process and NFPA 33 compliant.
05

PFS Core Control Panel

Non-pressurized booths ship with an electromechanical panel controlling exhaust, safety interlocks, and lighting. Pressurized configurations include spray, flash, and cure modes with programmable alarms.
TYPICAL SIZES

Common Booth Sizes (W × H × L)

Enclosed paint booths (W × H × L)

  • 14′ W × 9′ H × 24′, 27′, 30′ or 33′ L
  • 14′ W × 10′ H × 24′, 27′, 30′ or 33′ L
  • 14′ W × 12′ H × 24′, 27′, 30′ or 33′ L

Outdoor and large-format booths (W × H × L)

  • 14′ W × 9′ H × 24′, 27′ or 30′ L
  • 14′ W × 12′ H × 30′ L
  • 20′ W × 14′ H × 40′ L
  • 24′ W × 16′ H × 50′ L
  • 30′ W × 18′ H × 60′ L

Truck and fleet booths

  • Semi-truck: at least 16 ft wide × 50 ft deep × 14 ft tall
  • Cab and trailer together: 16–18 ft wide × 60–80 ft deep
  • Transit, school, and motor coaches: 14–16 ft wide × 40–60 ft deep × 12–14 ft tall
CODES & LISTINGS

Listed, Certified and Built to Code

PFS paint and spray booths are ETL listed by Intertek for flammable and combustible applications in the USA and Canada (cETLus). Control panels are UL 508A, including hazardous-location panels. Booths are built to NFPA 33, the IBC, and the NEC. Fire protection is dry chemical (Amerex, Pyro-Chem, or Stat-X) or sprinklers. PFS builds its own air make-up units.

  • Largest workpiece dimensions and production requirements
  • Airflow: cross-flow, side downdraft, downdraft, or semi-downdraft
  • Whether the booth needs integrated heat for an accelerated cure

Built for

Who a semi-downdraft truck booth is for

Semi-trucks and fleets

A pit-free step up from crossflow when you want a cleaner path on long fleet vehicles and you cannot — or do not want to — dig a pit.

Buses, coaches and RVs

Works as an all-round truck booth for tall, long vehicles. If you want vertical airflow down the full length with no pit, also compare the side downdraft truck booth.

Shops that cannot dig a pit

Semi-downdraft sits on your existing slab. Full downdraft still needs a pit or a raised basement floor.

SIZES

Typical sizes for trucks, buses and fleets

Typical truck and large-vehicle booth sizes (from the PFS truck and fleet hub)
ApplicationTypical working size
Class 8 tractor (semi-truck)At least 16 ft W × 50 ft L × 14 ft H
Tractor and trailer together16–18 ft W × 60–80 ft L
Transit, school and motor coaches14–16 ft W × 40–60 ft L × 12–14 ft H
Larger equipment and custom builds20 × 14 × 40, 24 × 16 × 50, 30 × 18 × 60 ft and beyond

Custom widths, heights and lengths are available. These ranges are the starting point Platinum Finishing Systems (PFS) uses on the truck and fleet hub — not a catalog of stock SKUs.

SEMI-DOWNDRAFT TRUCK BOOTHS AT A GLANCE

Semi-Downdraft Truck Booth Applications, Airflow and Compliance

Tap a topic to open it. Tap again to close.

A PFS semi-downdraft truck booth uses a front ceiling intake plenum and exhaust grates at the rear floor line. Air moves down and toward the rear. No pit is required. Some manufacturers call this modified downdraft. Comparing airflow types? See all four on the Truck & Fleet paint booths page.
Semi-trucks, buses, coaches, RVs and other fleet vehicles. This is a strong all-round choice when you want a better finish than crossflow without floor work.
Every PFS truck booth is ETL listed (Intertek) for the USA and Canada. Control panels are UL 508A. Booths are built to NFPA 33. CID2 lighting is standard on this line.
Send the largest vehicle (L x W x H), door style, your building footprint and ceiling height, the coatings you spray, and whether you want a heated truck paint booth, an air make-up unit, or spray and bake. Photos of the space help.
TRUCK BOOTH GUIDE

Planning a Semi-Downdraft Truck Booth

Use the same truck-booth starting sizes: a Class 8 tractor at least 16 ft W x 50 ft L x 14 ft H; tractor and trailer 16-18 ft W x 60-80 ft L; coaches 14-16 ft W x 40-60 ft L x 12-14 ft H; larger builds to 20 x 14 x 40, 24 x 16 x 50, 30 x 18 x 60 ft and beyond.

You want a cleaner finish than a crossflow truck booth, you do not want to dig a pit, and you need a long booth for semis, buses or fleets. Because intake is in the front portion of the ceiling rather than in side-wall plenums, this layout can also suit bays that cannot give up extra width.

Crossflow moves air the length of the booth from filtered doors to a rear exhaust wall. Semi-downdraft moves air from the front ceiling to the rear floor line. Side downdraft brings air in along the full ceiling and exhausts in the lower side walls. All three sit on your slab. Full downdraft exhausts through a grated floor and needs a pit or raised basement.

A PFS truck booth can optionally be built as a heated truck paint booth with natural gas (gas-fired) or electric heat, and can run spray and bake (cure) cycles on the PFS Core Control Panel (spray, flash and cure modes). Pair the booth with a PFS air make-up unit when you need tempered replacement air; humidity control is available on the AMU. Heat can also be configured for propane where the site has no natural gas. A heated AMU may be direct- or indirect-fired and is sized to the booth exhaust.

ETL listed (Intertek) for the USA and Canada, UL 508A panel, built to NFPA 33. Made in the USA. We supply drawings and data for permitting.

Send the largest vehicle dimensions, how the vehicle enters, shop footprint and ceiling height, the coatings you spray, and whether you want heat, an air make-up unit, or spray and bake. Photos of the bay help.

Tell us your vehicle dimensions.
We'll spec the booth.

Quote in 24 hours. Made in the USA with ETL listed components. Installed nationwide.

ETL listed mark
ETL & ETL-C Listed
Intertek — USA & Canada
pfs-ul508a-clean_e8efdeb8
UL 508A Certified
Industrial Control Panel Fabricator
pfs-nfpa
NFPA 33 Compliant
Spray Application Standard
EPA
EPA Compliant
Air Quality Standards
pfs-osha
OSHA Compliant
Workplace Safety Standards
Flag of the United States
Made in USA
Santa Rosa, CA

See related installs at American Event Services in Danville, IL and Mustang CAT in Hempstead, TX.

FREQUENTLY ASKED QUESTIONS

Semi-Downdraft Truck Booths — Common Questions

A semi-downdraft truck paint booth brings filtered air in through a ceiling plenum over the front half of the booth and exhausts it at the rear floor line, so air moves down and toward the rear. It is a step up in finish quality from crossflow, without the floor work of a full downdraft.
Yes. Modified downdraft is a common industry name for the same airflow: ceiling intake near the front, exhaust at the rear and no full-floor pit. PFS calls it a semi-downdraft truck booth and builds it for semis, buses and fleets.
No. A PFS semi-downdraft truck booth sits on your existing slab, with exhaust at the rear floor line instead of a grated pit floor. Only full downdraft truck booths need a pit or a raised basement floor.
Semi-downdraft moves air diagonally, from a front ceiling intake to rear floor exhaust. Crossflow moves air horizontally from the doors to a rear wall, and side downdraft moves air from a full-length ceiling to the lower side walls. All three sit on your slab with no pit.
Plan on at least 16 ft wide × 50 ft long × 14 ft high for a Class 8 tractor, and 16–18 ft wide × 60–80 ft long if the trailer stays on. Coaches typically need 14–16 ft wide × 40–60 ft long × 12–14 ft high. PFS builds larger custom sizes.
Yes. PFS truck booths can be built with natural gas (gas-fired) or electric heat, and the PFS Core Control Panel runs spray and bake (cure) modes. Pair the booth with a PFS air make-up unit for tempered, filtered replacement air; humidity control is available on the AMU.
Yes. Drive-through doors at both ends are available on all four PFS truck airflow types, including semi-downdraft. Vehicles enter at one end and leave at the other, a common layout for fleet and bus work.
Yes. Every PFS truck booth is ETL listed (Intertek) for the USA and Canada and built to NFPA 33, with a UL 508A control panel and CID2 lighting. PFS truck booths are made in the USA and ship nationally.
The airflow is the same: front ceiling intake, rear exhaust and no pit. The truck version is specified and sized for long, tall vehicles such as semis, buses and coaches. The Semi-Downdraft Paint Booths page covers the standard enclosed line.