
Built by Platinum Finishing Systems (PFS). Air travels the length of the booth from filtered doors to a rear exhaust wall — the most cost-effective way to paint semis, buses and fleet vehicles. ETL listed (Intertek) for the USA and Canada, NFPA 33 compliant, made in the USA. Ships nationally.


Air moves the length of the booth from filtered doors to a rear exhaust wall. It sits on your existing slab — no pit — and a drive-through layout is available. Optional natural gas or electric heat, an air make-up unit, and spray and bake (cure) can be added.
PFS paint and spray booths are ETL listed by Intertek for flammable and combustible applications in the USA and Canada (cETLus). Control panels are UL 508A, including hazardous-location panels. Booths are built to NFPA 33, the IBC, and the NEC. Fire protection is dry chemical (Amerex, Pyro-Chem, or Stat-X) or sprinklers. PFS builds its own air make-up units.
Tap any photo to open it full size.
A semi truck paint booth in this style starts at 16 ft W × 50 ft L × 14 ft H, with longer booths when the tractor and trailer stay together.
Typical working size is 14–16 ft W × 40–60 ft L × 12–14 ft H, with drive-through when you want a straight path through the shop.
Built to 20 × 14 × 40, 24 × 16 × 50, 30 × 18 × 60 ft and beyond when the job calls for it. A crossflow layout is the usual choice when installed cost matters.
| Application | Typical working size |
|---|---|
| Class 8 tractor (semi-truck) | At least 16 ft W × 50 ft L × 14 ft H |
| Tractor and trailer together | 16–18 ft W × 60–80 ft L |
| Transit, school and motor coaches | 14–16 ft W × 40–60 ft L × 12–14 ft H |
| Larger equipment and custom builds | 20 × 14 × 40, 24 × 16 × 50, 30 × 18 × 60 ft and beyond |
Custom widths, heights and lengths are available. These ranges are the starting point Platinum Finishing Systems (PFS) uses on the truck and fleet hub — not a catalog of stock SKUs.
Tap a topic to open it. Tap again to close.
A Class 8 tractor needs at least 16 ft W × 50 ft L × 14 ft H. A tractor and trailer together usually wants 16–18 ft W × 60–80 ft L. Transit, school and motor coaches typically run 14–16 ft W × 40–60 ft L × 12–14 ft H. Larger equipment can be built to 20 × 14 × 40, 24 × 16 × 50, 30 × 18 × 60 ft and beyond. Those ranges come from the PFS truck and fleet hub; custom sizes are available.
Drive-through is a common option on a crossflow truck booth for fleet shops that want vehicles to enter one end and leave the other. Single-entry still uses the same filtered-door to rear-exhaust airflow.
A crossflow truck booth sits on your slab. There is no floor pit to dig, which keeps install cost down compared with a full downdraft truck booth.
A PFS truck booth can optionally be heated with natural gas (gas-fired) or electric heat, and can run spray and bake (cure) cycles on the PFS Core Control Panel (spray, flash and cure modes). Pair the booth with a PFS air make-up unit when you need tempered replacement air; humidity control is available on the AMU.
PFS truck booths ship ETL listed (Intertek) for the USA and Canada, with UL 508A panels, and are built to NFPA 33. We supply the drawings and data your permit packet needs.
Send the largest vehicle dimensions, door type (drive-through or single-entry), shop footprint and ceiling height, the coatings you spray, and whether you want heat, an air make-up unit, or spray and bake. Photos or a simple floor sketch of the bay help us spec faster.
Quote in 24 hours. Made in the USA with ETL listed components. Installed nationwide.
See related installs at American Event Services in Danville, IL and Mustang CAT in Hempstead, TX.

Oversized spray booths for semi trucks, buses, fleet vehicles, and large equipment.

Ceiling intake and lower side-wall exhaust, no pit. A strong choice for buses, RVs and long vehicles.

Horizontal airflow — the most cost-effective enclosed booth for automotive and industrial finishing.

Tempered make-up air systems to replace exhausted air and maintain positive booth pressure.