Silver edition: Cross Flow Paint Booth
The most economical paint booth style, our Crossflow booths are the perfect choice to add into an existing building. Air flows horizontally through the booth into the exhaust plenum at the rear.
Standard Paint Booth Package
Crossflow spray booths ship with the highest quality components:
Our booths comply with NFPA-33, the top-level safety code in the USA for spray application of flammable or combustible materials.
These models have been tested and certified as an ETL-Certified Booth by Intertek/ETL (Edison Testing Labs), and OSHA (Occupational Safety & Health Administration) recognized NRTL (Nationally Recognized Testing Laboratory). This certification is mandatory by many local authorities for safe operation and compliance.
ETL certification included with your purchase!

- Assembly instructions.
- UL approved components.
- Air Flow Type: Air enters the booth from the filtered front doors and is exhausted from the rear exhaust chamber.
- Construction: 18 Gauge Galvanized Steel pre punched holes for nut and bolt assembly.
- Filters: 20" x 20" Fiber Glass Exhaust filters
- Lighting: LED Lighting or T8 Lighting four tube 4’ Light fixtures ETL listed.
- Doors: Double Wall doors (filtered ) & (1) Personnel Door.
- Fans: Tube Axial Fans with non-sparking blades motor sizes vary with booth size.
- Options: Powder coating
- Heater 1.0MBTU burner with spray, bake and cool downs
Silver edition: Cross Flow Paint Booth

Cross Flow - 14'W X 24'L X 9'H
24' Length

Cross Flow - 14'W X 27'L X 9'H
27' Length

Cross Flow - 14'W X 30'L X 9'H
30' length

Cross Flow - 14'W X 33'L X 9'H
33' length
Why Choose PFS
The Automotive crossflow design is one of the most popular in the industry. Combining an efficient airflow design with high visibility LED lighting, this paint booth design is the perfect choice for your autobody/repair shop! Crossflow paint booths utilize filtered front doors to pull intake air through the room and out through the exhaust plenum at the rear of the spray booth. This booth can easily fit cars, trucks, vans, parts, and more! Available tri-fold doors can open wide to accommodate larger parts and vehicles through the room. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
Optional Items
- Tri-fold Doors
- Upgraded LED lighting
- Double Wall insulated panels
- Viewing windows
- Filtration systems
- Cooling systems (on applicable models)
- Heating systems (on applicable models)
- Humidity Controls (on applicable models)
- Motor upgrades
- Roof height extensions
- Powder coating
Semi Downdraft Paint Booths
The Semi-downdraft paint booth is the ultimate balance between cost and quality. This booth is perfect for coating any cars, trucks, vans, and specialty vehicles. This spray booth pulls air from a filtered intake plenum, through the booth and out through the exhaust plenum at the rear of the booth. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
Side Downdraft Paint Booths
The Side downdraft paint booth is an efficient design made to increase your shop output. Air enters through the filtered intake plenum, and is exhausted through the sides of the paint booth. This airflow design enables you to paint various parts at the same time with no overspray hazard. This booth is perfect for coating any cars, trucks, vans, and specialty vehicles. This spray booth pulls air from a filtered intake plenum, through the booth and out through the exhaust plenum at the rear of the booth. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
Full Downdraft Paint Booths
Full Downdraft paint booths are generally accepted as the best airflow configuration. Air enters the paint booth through the filtered ceiling, and is exhausted through the floor of the booth. Downdraft paint booths are available with a raised basement, or require a pit to be dug. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
