Silver Edition: Truck Cross Flow Paint Booth
Our Silver Edition Cross Flow Booth draws fresh air through filters in the drive-in doors. This clean filtered air is pulled through the booth and then exhausts through a filter system on the other end. The model comes standard with a filtered exhaust chamber to pull air from the room. This booth is perfect to fit any size truck from Semi Truck to a Commercial Bus. Custom sized booths available from small to large!
Standard Paint Booth Package
Booths are equipped the following components:
Our booths comply with NFPA-33, the top-level safety code in the USA for spray application of flammable or combustible materials.
These models have been tested and certified as an ETL-Certified Booth by Intertek/ETL (Edison Testing Labs), and OSHA (Occupational Safety & Health Administration) recognized NRTL (Nationally Recognized Testing Laboratory). This certification is mandatory by many local authorities for safe operation and compliance.
ETL listing included with your purchase!
- Assembly instructions
- UL approved components
- We can customize to meet your requirements
- Doors: 15' high x 11' wide entrance doors with filtered front doors & Personnel Door.
- Filters: 20" x 20" Fiber Glass exhaust filters
- Panels: Air-tight, 18 gauge galvanized prime steel fastened with 5/16" bolts.
- Lighting: LED Lighting or T8 Lighting four tube 4’Light fixtures ETL listed
- Fans: Tube Axial Fans with non-sparking blades Motor Sizes Vary with booth size.
- Meets NFPA 33 & OSHA 1910 guidelines (check your local codes for local permit requirements)
- Optional: Powder coating
- All quality components proudly made in the USA!
Silver edition: Truck Cross Flow Paint Booth
Cross Flow 16'W x 45'L x 16'H
Internal Dimensions 16'W x 45'L x 16'H
Cross Flow 16'W x 55'L x 16'H
Internal Dimensions 16'W x 55'L x 16'H
Cross Flow 16'W x 60'L x 16'H
Internal Dimensions 16'W x 60'L x 16'H
Semi Downdraft Paint Booths
The Semi-downdraft paint booth is the ultimate balance between cost and quality. This booth is perfect for coating any cars, trucks, vans, and specialty vehicles. This spray booth pulls air from a filtered intake plenum, through the booth and out through the exhaust plenum at the rear of the booth. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
Side Downdraft Paint Booths
The Side downdraft paint booth is an efficient design made to increase your shop output. Air enters through the filtered intake plenum, and is exhausted through the sides of the paint booth. This airflow design enables you to paint various parts at the same time with no overspray hazard. This booth is perfect for coating any cars, trucks, vans, and specialty vehicles. This spray booth pulls air from a filtered intake plenum, through the booth and out through the exhaust plenum at the rear of the booth. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
Full Downdraft Paint Booths
Full Downdraft paint booths are generally accepted as the best airflow configuration. Air enters the paint booth through the filtered ceiling, and is exhausted through the floor of the booth. Downdraft paint booths are available with a raised basement, or require a pit to be dug. PFS Designs and manufacturer all paint booth models in house to ensure efficiency and compliancy. Whether you are spraying a solvent based, waterborne, or combination, PFS has you covered. We can design a custom solution tailored to meet your exact needs and requirements. All booths are made to exceed NFPA, OSHA, and ETL requirements.
- ETL listed manufacturer
- Best pricing in the industry
- Lowest lead times in the industry
- Fully customizable paint booths
- Certified in all US states
- Exceed all local and national codes
- Modular paint booths can be expanded
- National service and installation
